Manufacturing
Electrical Maintenance Technician Job Description
Electrical Maintenance Technicians keep production equipment running by diagnosing and repairing electrical faults, performing scheduled preventive maintenance, and responding to breakdowns that shut down production lines. They work on motor drives, PLCs, sensors, control panels, and power distribution equipment — and they do it under pressure, because every minute of unplanned downtime costs money.
Last updated
Role at a glance
- Typical education
- Apprenticeship, Associate degree in electrical technology, or vocational training
- Typical experience
- Entry-level to experienced (varies by skill)
- Key certifications
- Journeyman Electrician, NFPA 70E, OSHA 30, PLC Operator training
- Top employer types
- Automotive, heavy manufacturing, food and beverage, industrial automation
- Growth outlook
- Strong structural demand driven by automation and a retiring workforce
- AI impact (through 2030)
- Augmentation — automation and IoT increase the complexity of systems, driving higher demand for technicians capable of maintaining advanced robotics and networked sensors.
Duties and responsibilities
- Diagnose and repair electrical faults on production equipment: motor failures, VFD faults, PLC I/O errors, sensor malfunctions, and control circuit failures
- Perform lockout/tagout (LOTO) procedures correctly every time before working on energized equipment, without shortcuts under production pressure
- Execute scheduled preventive maintenance tasks: motor insulation resistance testing, VFD filter cleaning, thermographic scanning of panel connections, and contact inspection
- Respond to equipment breakdown calls, assess the fault, and communicate a realistic repair time to the production supervisor before starting the work
- Read and interpret electrical schematics, wiring diagrams, and ladder logic printouts to trace circuit operation and isolate fault locations
- Replace and wire motors, control components (contactors, overloads, relays, push buttons), and PLC I/O modules per the original design or approved engineering change
- Assist electrical engineers with capital project installation: pulling conduit, running wire, terminating connections, and performing I/O checkout
- Maintain electrical maintenance records: PM completion, repair history, parts used, and downtime duration in the CMMS (Maximo, SAP PM, eMaint)
- Identify recurring failure patterns and escalate root causes to engineering for permanent corrective action
- Mentor apprentice technicians on safe work practices, diagnostic techniques, and equipment-specific knowledge
Overview
Electrical Maintenance Technicians are the people who respond when a production line goes down with an electrical fault. They show up, diagnose the problem with the right combination of systematic method and hard-won experience, repair it, and get the line back up — without taking shortcuts that will cause the same fault next week.
The job splits between reactive work (breakdown response) and planned work (preventive maintenance). In breakdown response, the technician takes a call, goes to the machine, reads the fault code, pulls out the schematic if needed, traces the circuit to the likely failure point, and either replaces the component or escalates to engineering if the problem is beyond simple repair. The clock is running, the production supervisor is watching, and the ability to work methodically without panicking is what separates the technicians who get promoted from those who don't.
Preventive maintenance is less urgent but equally important. Thermographic scanning of motor control centers, meggering motors to check insulation resistance, cleaning VFD heat sinks and filters, inspecting contactor tips — these tasks prevent breakdowns rather than reacting to them. Plants that do PM consistently have less downtime; those that skip it when the schedule is tight eventually pay for it.
PLC troubleshooting has become a core skill, not a specialty. Modern manufacturing equipment is PLC-controlled, and a technician who can get online with an Allen-Bradley or Siemens controller, navigate the ladder logic, and watch the rung conditions change in real time can diagnose problems in minutes that would otherwise take hours. It's not the same as programming — it's reading and interpreting, which is a lower bar but still requires deliberate learning.
The physical demands are real: working in electrical panels, pulling cable through conduit, climbing to reach overhead equipment, working in confined spaces. PPE compliance — arc flash rated clothing, insulating gloves, face shields at appropriate ratings for the work — is not optional.
Qualifications
Education and training paths:
- Journeyman electrician licensure through IBEW or state-approved apprenticeship (4–5 years; the gold standard)
- Associate degree in electrical technology, industrial electronics, or mechatronics
- Vocational program plus on-the-job training in a manufacturing environment
- Military electrical MOS: Army 25U (Signal Support Systems), Navy FT or ET (Electronics Technician)
Certifications:
- Journeyman Electrician (state-specific) — required for some work, valued everywhere
- NFPA 70E Electrical Safety for Industry — arc flash awareness and work practice compliance
- OSHA 30 General Industry — standard for maintenance technicians
- Allen-Bradley or Siemens PLC Operator training — company or vendor-sponsored; validates PLC monitoring capability
- CMVP (Certified Maintenance & Reliability Professional) — SMRP credential for technicians pursuing leadership roles
Technical skills:
- Power distribution: reading single-line diagrams, working in motor control centers, troubleshooting 480V/208V systems
- Motor drives: VFD parameter reading and adjustment (Rockwell PowerFlex, ABB, Siemens SINAMICS), motor starter troubleshooting
- PLC basics: Allen-Bradley Studio 5000 or RSLogix 5000, Siemens TIA Portal — read and navigate programs online
- Instrumentation: analog and digital sensors (4-20mA, discrete, encoder), signal tracing with multimeter and loop calibrator
- Tools: digital multimeter, clamp-on ammeter, megohmmeter (Megger), infrared thermometer, process calibrators
- Conduit and wiring: EMT, rigid conduit bending, wire pulling, terminal termination, cable management
Career outlook
Electrical Maintenance Technician is one of the more secure skilled trade positions in U.S. manufacturing. Automation replaces production operators and assemblers; it doesn't replace the people who maintain the automation. Every robot, every PLC-controlled machine, every automated production line needs electrical maintenance support, and that support requires human judgment.
The demand picture is strong and structural. The average age of maintenance technicians in U.S. manufacturing is high — the retirement wave is real, and the replacement pipeline is thin. Vocational enrollment in electrical programs has not kept pace with demand. Manufacturers consistently report electrical maintenance as among their hardest-to-fill roles, and many are actively partnering with community colleges and apprenticeship programs to build their own pipelines.
The automation investment cycle is creating higher-skill demand. Plants installing AGVs, collaborative robots, and industrial IoT sensor networks need maintenance technicians who can handle network connectivity, servo drive tuning, and vision system calibration alongside traditional electrical repair. These expanded skill requirements are creating a premium tier of maintenance technicians who earn engineer-adjacent compensation.
Salary progression for skilled technicians is meaningful. Entry-level technicians earn $42–52K; experienced technicians with VFD and PLC troubleshooting skills earn $62–75K; senior technicians and maintenance leads at large automated facilities earn $78–92K. Union facilities in automotive and heavy manufacturing often push total compensation to $90–110K with overtime.
The career path leads toward lead technician, maintenance supervisor, reliability engineer, or facilities engineer. Technicians who develop strong PLC troubleshooting and instrumentation skills sometimes transition into automation engineering roles — a path with significantly higher compensation ceilings.
Sample cover letter
Dear Hiring Manager,
I'm applying for the Electrical Maintenance Technician position at [Company]. I'm a journeyman electrician with four years of industrial maintenance experience at [Employer], a plastics injection molding facility with 45 machines and a 24/7 production schedule.
My maintenance responsibilities include all electrical troubleshooting and repair on the molding machines and auxiliary equipment, scheduled PM tasks including motor insulation resistance testing and thermographic panel scans, and responding to breakdown calls during my shift. I carry a multimeter, clamp-on amp meter, and megger as standard tools, and I've done enough motor replacements on our size range that I can do a standard frame swap in about 40 minutes.
The skill I've invested the most in recently is PLC troubleshooting. Three of our machines run Allen-Bradley CompactLogix controllers, and I've learned to get online with them and navigate the ladder logic when I have a fault I can't isolate from the terminal box. Last month I tracked down an intermittent fault on a temperature control loop — the PLC was showing the output commanded, the panel wiring was fine, but the heater band wasn't heating consistently. Going online, I could see the analog output signal varying unexpectedly. That traced to a damaged module I'd have missed without being able to see the I/O values in real time.
I'm looking for a facility with more automation complexity — servo drives, vision systems, or robotics — to continue developing. I'm willing to take on additional training on any control platform you run.
[Your Name]
Frequently asked questions
- What does an Electrical Maintenance Technician do?
- Electrical Maintenance Technicians keep production equipment running by diagnosing and repairing electrical faults, performing scheduled preventive maintenance, and responding to breakdowns that shut down production lines. They work on motor drives, PLCs, sensors, control panels, and power distribution equipment — and they do it under pressure, because every minute of unplanned downtime costs money.
- What are the main duties of an Electrical Maintenance Technician?
- Core duties include: diagnose and repair electrical faults on production equipment: motor failures, VFD faults, PLC I/O errors, sensor malfunctions, and control circuit failures; perform lockout/tagout (LOTO) procedures correctly every time before working on energized equipment, without shortcuts under production pressure; and execute scheduled preventive maintenance tasks: motor insulation resistance testing, VFD filter cleaning, thermographic scanning of panel connections, and contact inspection.
- Does an Electrical Maintenance Technician need an electrician's license?
- Journeyman electrician licensure is required in some states for industrial maintenance work above a certain voltage level, and it's valued by employers even where not strictly required — it signals a documented level of training and competency. IBEW apprenticeship programs produce well-rounded maintenance technicians. Many plants also accept equivalent in-house training plus demonstrated competency. The license requirement varies by state and facility type.
- What is LOTO and why is it non-negotiable?
- Lockout/Tagout is the OSHA-required procedure (29 CFR 1910.147) for isolating energy before working on equipment that could injure someone if unexpectedly energized. A machine that restarts while a technician's hand is inside it causes catastrophic injuries. Every competent maintenance technician knows LOTO procedures cold — not as a compliance exercise but as a reflexive practice. Technicians who shortcut LOTO 'just this once' are the ones who eventually appear in incident reports.
- What PLC experience should an Electrical Maintenance Technician have?
- The ability to read and navigate existing PLC programs — go online, view ladder logic, interpret rung conditions, and force I/O points to diagnose faults — is increasingly expected even of maintenance-level technicians at modern manufacturing plants. Writing new programs is typically an engineering function, but a technician who can't read a Rockwell or Siemens program at all is limited in complex troubleshooting situations. Most companies want at least Allen-Bradley RSLogix 5000/Studio 5000 familiarity.
- What is the difference between an electrical maintenance technician and an industrial electrician?
- Industrial electricians typically focus on installation work: running conduit, pulling wire, terminating connections, and installing new equipment per drawings. Electrical maintenance technicians focus on keeping existing equipment running: diagnosing faults, replacing components, and performing PM. In many plants the roles overlap, and some technicians do both. The maintenance technician role typically requires more system-level troubleshooting knowledge of the specific production equipment.
- What are the most valuable skills for career advancement as an Electrical Maintenance Technician?
- PLC programming and HMI troubleshooting capability — the ability to get online with a controller and understand what it's doing — is the single skill that most clearly differentiates senior technicians from junior ones at modern automated plants. Beyond that: VFD parameter programming, motion control (servo drive setup and tuning), and instrumentation calibration (pressure, temperature, flow transmitters) create a profile that crosses toward industrial automation engineering.
Related job descriptions
See all Manufacturing jobs →- Electrical Engineering Technician$48K–$78K
Electrical Engineering Technicians assist electrical engineers in designing, testing, and maintaining electrical equipment and systems. They build prototype circuits, conduct electrical tests, troubleshoot equipment failures, interpret schematics and wiring diagrams, and document test results — serving as the hands-on technical support that turns engineering designs into working hardware.
- Electrical Technician$46K–$75K
Electrical Technicians install, test, and maintain electrical systems and equipment in manufacturing plants, commercial buildings, and industrial facilities. They work under engineer direction and applicable code requirements to wire equipment, troubleshoot electrical problems, and keep power and control systems operating safely — a hands-on role at the intersection of skilled trade and technical knowledge.
- Maintenance Technician$48K–$80K
Maintenance Technicians perform hands-on maintenance and repair on production equipment, facility systems, and utilities in manufacturing plants. They combine mechanical, electrical, and sometimes instrumentation skills to troubleshoot failures, execute preventive maintenance, and keep equipment running to production requirements. Multi-craft technicians — capable across disciplines — are the most sought-after and best-compensated workers in this category.
- Maintenance Technician Electrician$55K–$90K
Maintenance Technician Electricians perform electrical maintenance, troubleshooting, and repair on production equipment, power distribution systems, and facility electrical infrastructure in manufacturing facilities. They work on 480V three-phase motor circuits, variable frequency drives, control panels, PLC systems, and instrumentation — diagnosing faults with test equipment and restoring equipment to operation while meeting OSHA electrical safety requirements.
- Aircraft Maintenance Technician$55K–$105K
Aircraft Maintenance Technicians (AMTs) — commonly called A&P mechanics — inspect, repair, and maintain aircraft structures, systems, and powerplants to ensure airworthiness. They perform everything from routine 100-hour checks to major structural repairs, working from manufacturer maintenance manuals and FAA-approved data to certify that aircraft are safe to fly.
- Building Maintenance Technician$42K–$68K
Building Maintenance Technicians perform hands-on repairs and upkeep across the mechanical, electrical, plumbing, and structural systems of commercial buildings, apartment complexes, and institutional facilities. They handle a wide range of work — from fixing a leaking faucet and replacing a light ballast to diagnosing HVAC problems and patching drywall — keeping buildings functional and tenants satisfied without the cost of specialized trade contractors for every job.